|
|
|
|
|
3
|
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
 9.63 Million approx. / 96.35 Lakh approx.
|
|
Location
|
Kerala Tenders
|
Ref.No
|
55198732
|
|
Closing Date
|
21 - Dec - 2022
|
21 Days to go
|
View Tender Details
|
|
Supply of material quarry waste, stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand, portland cement, solid blocks of size 30x20x15, pvc pipe 32 mm outer dia 4kg/cm2, stone for masonry work, aracanut post, wire nails, red oxide zinc chromate primer, gi trafford profile sheet 0.35 mm thick, gi limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , bitumen washer , galvanised wire mesh of average width of aperature 1.4 and nominal dia of wire 0.63mm, twisted steel/deformed bars , g.i pipes 40 mm dia, g.i pipes 50mm dia, fine sand, wire nais, welding by electric plant, royalty for good earth , cow dung, coir pith compost, polyurethene bags , cost of poovali ( 5 ltr), green net 75 % shade.
|
|
|
|
|
|
5
|
|
Sector
|
Railways Transport Services Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Kerala Tenders
|
Ref.No
|
55190237
|
|
Closing Date
|
19 - Dec - 2022
|
19 Days to go
|
View Tender Details
|
|
Supply of consumables, panel light indicator led, hinges, gland packing, epxoy paint, thinner, casing cap, ss 304 grade link chain, grade snap hook, cu flexible fr cable, wire red, medium conduit 20 mm isi.
|
|
|
|
|
|
|
|
|
|
9
|
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
8 Million / 80 Lakh
|
|
Location
|
Kerala Tenders
|
Ref.No
|
54991412
|
|
Closing Date
|
14 - Dec - 2022
|
14 Days to go
|
View Tender Details
|
|
Supply of material for stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, stone aggregate(single size): 10 mm nominal size, twisted steel/deformed bars, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, solid blocks of size 30x20x20cm, solid blocks of size 30x20x15cm, g.i pipes 50 mm dia, red oxide zinc chromate primer, welding by electric plant, flats up to 10 mm in thickness, mild steel round bar 12 mm dia and below, fine sand (zone iv), water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, acrylic exterior paint, exterior primer, quarry waste, hire charge of 10 hp engine and pump set, diesel oil, g.i. pipes 25 mm dia, structural steel such as tees, angles, channels and r.s. joists, galvanised steel plain sheets, epoxy paint, black japan, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, g.i. pipes 40 mm dia, white vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings, pvc pipe 25 mm outer dia. 10kgf cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, pvc bend 63 mm dia, aracanut post, mild steel tubes hot finished welded type, green net 75% shade, polyurethene bags, royalty for good earth, coir pith compost, cowdung, cost of poovali(5 ltr), adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjili wood planks, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, mild steel round bar above 12 mm dia, 200 mm aluminium aldrop, anodised aluminium handles 125 mm with plate 175 x 32 mm, chromium plated brass screws 25 mm, iron hooks & eyes 100 mm, anodised aluminium tower bolt (barrel type)300x10 mm, chromium plated brass screws 30 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), plastic emulsion paint, pink primer (for wood), synthetic enamel paint in black or chocolate shade, vitrified floor tile 60x60 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, pvc pipe 110 mm outer dia. 4kgf/cm2, mgnregs works.
|
|
|
|
10
|
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
8 Million / 80 Lakh
|
|
Location
|
Kerala Tenders
|
Ref.No
|
54991415
|
|
Closing Date
|
14 - Dec - 2022
|
14 Days to go
|
View Tender Details
|
|
Supply of material for stone aggregate(single size): 40 mm nominal size,stone aggregate(single size):20 mm nominal size,coarse sand (zone iii),portland cement,hire charges of concrete mixer 0.25 to 0.40 cum with hopper,vibrator (needle type 40 mm),stone for masonry work,stone aggregate(single size): 10 mm nominal size,twisted steel/deformed bars,wall form panel 1250x500 mm,corner angle 45x45x5 mm 1.50 m long,100 mm channel shoulder 2.5 m long,double clip (bridge clip),single clip,m.s. tube 40 mm dia,solid blocks of size 30x20x20cm,solid blocks of size 30x20x15cm,g.i pipes 50 mm dia,red oxide zinc chromate primer,welding by electric plant,flats up to 10 mm in thickness,mild steel round bar 12 mm dia and below,fine sand (zone iv),water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre,acrylic exterior paint,exterior primer,quarry waste,hire charge of 10 hp engine and pump set,diesel oil,g.i. pipes 25 mm dia,structural steel such as tees, angles, channels and r.s. joists,galvanised steel plain sheets,epoxy paint,black japan,galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm,wire nails,gi trafford profile sheet 0.35mm thick,bitumen washer,g.i limpet washer,galvanised steel j or l hooks 8 mm dia,galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots,g.i. pipes 40 mm dia,white vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings,pvc pipe 25 mm outer dia. 10kgf cm2,pvc pipe 63 mm outer dia . 6kgf/cm2,pvc bend 63 mm dia,aracanut post,mild steel tubes hot finished welded type,green net 75% shade,polyurethene bags,royalty for good earth,coir pith compost,cowdung,cost of poovali(5 ltr),adjustable telescopic prop 3 m (2.02-3.75m),beam clamp 300-380 mm (450-1070 mm),second class kail wood in planks,second class kail wood in scantling,hollock ballies 125 mm diameter,adjustable span eso+si (2.35-3.40),anjili wood scantls,bright finished or black enameled mild steel butt hinges 100x58x1.90 mm,bright finished or black enameled mild steel butt hinges 50x37x1.50 mm,bright finished or black enameled mild steel screws 40 mm,bright finished or black enameled mild steel screws 20 mm,anjili wood planks,factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile,35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished),powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm,mild steel round bar above 12 mm dia,200 mm aluminium aldrop,anodised aluminium handles 125 mm with plate 175 x 32 mm,chromium plated brass screws 25 mm,iron hooks & eyes 100 mm,anodised aluminium tower bolt (barrel type)300x10 mm,chromium plated brass screws 30 mm,float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm),plastic emulsion paint,pink primer (for wood),synthetic enamel paint in black or chocolate shade,vitrified floor tile 60x60 cm,ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black,ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc.,polyethylene water storage tank with cover and suitable locking arrangemnet,vitreous china flat back wash basin 550x400 mm,15 mm c.p.brass tap,c.p. brass waste 32 mm,c.i. bracket for wash basin and sinks,semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings,stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm,vitreous china orrisa type w.c. pan size 580 mm,flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe),100 mm s.c.i. trap with vent heel,pvc pipe 110 mm outer dia. 4kgf/cm2, mgnregs works.
|
|
|